The marine rescue setup package is including the following items:
> DJI Matrice 100
> DJI X3 FC350 4K daylight camera on front side (optional upgrade to Z3 or WX500 gimbal)
> 2.4 GHZ DJI remote control
> TB47D battery
> quick-release propellers
> 3 axis FLIR gimbal with integrated 5.8 Ghz transmitter
> 7″ LCD screen (for thermal) with build in 5.8 Ghz receiver
> FLIR LCD touch remote control unit (for full control over FLIR camera) USA 915,6MHZ / EU 869,5Mhz
> FLIR thermal camera (VUE Pro_R 640 13mm 9HZ radiometric)
> Lifebuoy dropping system
> Lifebuoy with 5 x c02 cartridges
> Matrice landing gear floats
- Easy to use DJI Matrice 100 with thermal FLIR thermal and 4K daylight camera.
- This package is ready-to-fly, including the sUAV DJI Matrice 100. The package is provided with the thermal FLIR camera (FLIR VUE Pro_R 640 radiometric is the most popular brand worldwide in thermal imaging)
- Dual screen: Watch daylight and thermal view simultaneously on two screens.
- This setup is provided with an additional DRONExpert LCD touch controller, for controlling the thermal FLIR camera (tilting, digital zoom, palettes, isotherm*, delta-t*). You are able to control the FLIR camera/gimbal separately.
- The FLIR thermal camera is provided with an 3 axis gimbal for stabilized image.
- Within this setup both camera’s can be controlled separately, so you also can aim (tilt) the FLIR camera to another direction then the daylight camera
With the FLIR LCD touch control unit you have full remotely control over the FLIR thermal camera/gimbal. It allows you control over the Tilt, Palettes, Digital zoom, AGC settings, automatic hotspot detection, Isotherm and Delta-t.
The DJI Matrice 100 marine rescue setup is delivered with the FLIR VUE Pro_R 640 (radiometric).
The FLIR VUE Pro_R is the newest model of FLIR thermal camera series. Vue Pro R captures regular JPEGs and fully radiometric R-JPEGs that can be fully analyzed in FLIR Tools thermography analysis and reporting software. It also records 8-bit digital video in MJPEG or H.264 formats, and 14-bit TIFFs right on the camera so you won’t lose any of your data to transmission loss. Imagery is saved to the micro-SD card and can be retrieved either directly from the card or by plugging the camera into a USB cable, where your computer will see it as a storage device.
With the FLIR VUE Pro_R you can control tilt, palettes, digital zoom, auto hotspot detection and color settings.
Optional is an upgrade to an FLIR TAU2_R (radiometric): The FLIR TAU2_R is the most advanced FLIR thermal camera. With the FLIR TAU2_R you can control tilt, palettes, digital zoom, auto hotspot detection and color settings. However, with the TAU2 version you also are able to control the Isotherm and delta-t.
What can you do with radiometric Isotherm and Delta-t? Delta-t and Isotherm is a good feature to have within professional application. This is best explained with an example: when you do search and rescue (SAR human detection) you can set the Isotherm on (for example) 36 degree and set delta-t on 1 degree. Temperatures on 36 degree will be highlighted very strong descending to 35 and 37 (1 degree Delta-t), so 35 degree will be little less highlighted then 36 degree. This way you can specify an temperature which make spotting this temp easier.
The Phantom 4 thermal gimbal operates standalone (it only needs power from UAV). This means that it is future proof and can be installed on other UAV also. Whenever you decide to upgrade with another carrier, you simply can rebuild the thermal setup to this new UAV also.
With the dual screen you have simultaneously daylight and thermal view. Both cameras can be controlled separately. It has proven that the daylight camera is essential in most applications.
If you have purchased the thermal gimbal for the DJI Phantom 4 but also having an Inspire 1 (for example), then you easily can swap the thermal gimbal between these UAV’s.
The thermal gimbal can also be installed onto the optional handheld and optional 10m carbon fibre photopole. This way you can use it indoor and outdoor in situations where you are unable to fly (permits/restrictions).
Automatic hotspot detection:
With the ‘automatic hotspot detection’ you are able to automatically detect heat source. This way you will automatically be notified when detecting (for example) an human temperature when scanning an area.
With the optional tripod you will be able to mount the tablet (for daylight view) and the 7″ LCD (for thermal view). The included TB48/TB47 battery holder can be connected to both screens (and DJI controller).
Optional professional flightcase (airtight and waterproof), military grade (with build in charger):
With the optional flightcase you are able to charge 4 batteries and store another 6 batteries (total 10 batteries).
Q: What is the main difference between the FLIR TAU2 and FLIR VUE camera:
A: The cameras have some differences, but the biggest difference is that the TAU2 is radiometric (14 bit), and therefore DRONExpert is able to remotely control the isotherm and delta-t. On the VUE camera you can control the tilt, palettes and digital zoom, on the TAU2 you can control the tilt, palettes, digital zoom, isotherm and delta-t. In most professional applications this might be needed.
Q:What can you do with radiometric Isotherm and Delta-t:
A: Delta-t and Isotherm is a good feature to have within professional application. This is best explained with an example: when you do ‘search and rescue’ (SAR human detection) you can set the Isotherm on (for example) 36 degree and set delta-t on 1 degree. Temperatures on 36 degree will be highlighted very strong descending to 35 and 37 (1 degree Delta-t), so 35 degree will be little less highlighted then 36 degree. This way you can specify an window temperature which make spotting this temp easier.
Q: Can i also buy the package for installation on my own sUAV:
A: Yes, no problem, we also deliver the gimbal package + FLIR camera with instruction for installation on your own sUAV!
Prices excluding VAT.
* Only on TAU2 FLIR camera