DRONExpert is proudly presenting the 3in1 ‘one for all’ radiometric gimbal setup with dual camera setup, which allows you to have simultaneously daylight and thermal view. The 3in1 radiometric thermal gimbal with radiometric features is one of the most advanced thermal gimbals at this moment.
The 3in1 ‘one for all’ radiometric thermal gimbal is tested an available for the following drone models:
– Yuneec Q500
– DJI Phantom 4 (all models)
– DJI Inspire 1 (all models)
– DJI Inspire 2
– DJI Matrice 100
– DJI Matrice 200 (all models)
– DJI Matrice 600
The setup can be purchased with the following FLIR thermal camera’s.
|FLIR camera for installation onto the VUE (Pro R) mount||Price|
|FLIR Vue 336||€ 1499|
|FLIR Vue Pro 336 (including storage)||€ 1999|
|FLIR Vue Pro R 336 (including storage and radiometric)||€ 2999|
|FLIR Vue 640||€ 2999|
|FLIR Vue Pro 640 (including storage)||€ 3499|
|FLIR Vue Pro R 640 (including storage and radiometric)||€ 4499|
With the radiometric setup you are able to store video and radiometric images on an integrated microSD card. This way you can use FLIR TOOLS for afterwards analyzing and generate reports with use of the recorded radiometric images. Radiometric data is stored in Radiometric JPEGs with temperature data embedded in every pixels.
Auto hotspot detection:
The ‘Automatic hotspot detection’ is an feature developed by DRONExpert Netherlands and only available on the 3in1 Radiometric thermal gimbal. When scanning the surface you will automatically be notified when an hotspot is detected. This is highlighted on the LCD screen with the measured temperature, but you also get an acoustic alarm on the FLIR touch controller (can be switched off). Threshold settings are fully adjustable with the LCD touch remote, which allows you to select the preferred temperature bandwidth, for example if you are searching for animals you can select different temperature bandwidth then when you are searching for bush fire.
This feature is only available in combination with the Vue Pro R and FLIR long range LCD touch control unit.
GPS auto hotspot detection:
Optionally the ‘auto hotspot detection’ can be upgraded with ‘GPS auto hotspot detection’. With this feature you can realtime monitor the GPS location of the detected hotspot (so not the GPS location of the drone, but the calculated GPS position of the hotspot itself). These GPS coordinates can also be stored for afterwards analysing. The ‘GPS automatic hotspot detection’ is ideal when you need to save the GPS locations of the hotspots, for example with bird nest/wildlife preservation.
FLIR LCD touch controller:
With the included LCD touch controller you have full remotely control over the FLIR camera/gimbal. You are able to remotely control the: tilt, palettes, isotherm*, delta-t*, relatherm, color settings, automatic hotspot detection, start/stop recording, app mode, digital zoom and other settings.
The controls is separately from the DJI RGB camera, so both cameras can be controlled separately. It is designed for use of 1 pilot or 2 pilots. It is also possible to add additional LCD receivers for extra thermal supervision.
* Only with TAU2 (R)
|Military grade Professional flightcase (airtight and waterproof) with integrated charging system
(Without charging hub € 999)
|Tripod with build in charging hub for LCD and controller||€ 369|
|Handheld (to use thermal gimbal also as handheld)||€ 199|
|10 meter carbon fibre photo pole (to use thermal gimbal also on photo pole)||€ 1299|
|upgrade to GPS Auto Hotspot Detection (realtime GPS location of Hotspot)||€ 895|