DRONExpert Netherlands is proudly presenting there lightweight FLIR Boson thermal setup. The complete weight of the mount including camera is less then 65 Gram. Due this small payload the flight time of the Phantom 4 Pro is reduced to an minimum. The package comes complete including Phantom 4 Pro, which is ready to fly when you receive it. Do you already have an DJI Phantom 4, Inspire 1, Inspire 2, Matrice 100, Matrice 200 or Matrice 600? Then please check our ‘Do it yourself installation’ packages, for complete package which can be installed on own UAV.
FLIR Boson 640 sensor!
We can now also deliver the FLIR Boson 640 for this package. Please leave us a message if this is the sensor you prefer.
There are 2 ways of mounting the Boson setup. You can choose to mount it onto the original DJI camera, this way the thermal Boson camera works in slave mode with the DJI RGB camera, so the thermal lens will always tilt in the same direction as the DJI RGB camera in this mounting setup.
The second mounting option is to install it on the backside of the Phantom 4 Pro body. This is often the preferred method for applications which requires the FLIR Boson camera to aim 90 degree downwards and have the DJI RGB camera controlled separately (for orientation).
With the setup you will have simultaneously daylight and thermal view. In most applications it is essential to have an combination with the daylight camera. The thermal is perfect for detection and the daylight camera is excellent for recognition.
The Phantom 4 Pro with Boson mount is an excellent setup for hunters, spotting wildlife (f.e. fawns), search and rescue etc. Due the lightweight of the Boson mount you have an long flight time (longer then 20 minutes with dual camera setup).
Remote FLIR LCD touch control unit (remotely control FLIR Boson: Palettes, Tilt, Setting, Digital zoom, relatherm, start/stop recording) +749 euro