The Do it yourself package 3in1 Vue 336 Pro R for the inspire 2.
DRONExpert is proudly presenting the Inspire 2 thermal setup with dual camera setup, which allows you to have simultaneously daylight and thermal view. The 3in1 radiometric thermal gimbal with radiometric features is one of the most advanced thermal gimbals at this moment. The thermal setup is provided with an radiometric VUE PRO R 336 version (optional this can also be upgraded to an TAU2 R if required). The resolution of the 336 is sufficient for applications when medium to large objects needs to be spotted (SAR, solar inspection, Firefighting, medium size wildlife detection (Fawns), roof inspection etc.), in case of spotting on far distance, or small objects (for example Birds, Eggs) we recommend to go for the ‘3in1 Radiometric 640R Inspire 2’
Got your own Vue 336 sensor?
If you have an own Vue 336 sensor and want to use it, you can. Also if you want to upgrade your sensor to an Pro, R or Pro R this would be possibile.
With the radiometric model you are able to store video and radiometric images on an integrated microSD card. This way you can use FLIR TOOLS for afterwards analyzing and generate reports with use of the recorded radiometric images. Radiometric data is stored in Radiometric JPEGs with temperature data embedded in every pixels.
Automatic hotspot detection:
The ‘Automatic hotspot detection’ is an feature developed by DRONExpert Netherlands and only available on the 3in1 Radiometric thermal gimbal.
When scanning the surface you will automatically be notified when an hotspot is detected. This is highlighted on the LCD screen with the measured temperature, but you also get an acoustic alarm on the FLIR touch controller (can be switched off). Threshold settings are fully adjustable with the LCD touch remote, which allows you to select the preferred temperature bandwidth, for example if you are searching for animals you can select different temperature bandwidth then when you are searching for bush fire.
FLIR LCD touch controller:
With the included LCD touch controller you have full (max. 1000 meter) control over the FLIR camera/gimbal. You are able to remotely control the: Tilt, Palettes, Isotherm*, Delta-T*, Relatherm, Color settings, Automatic Hotspot Detection, Start/Stop recording, App mode, Digital zoom and settings.
The control is separately from the DJI RGB camera, so both cameras can be controlled separately. It is designed for use of 1 pilot or 2 pilots. It is also possible to add additional LCD receivers for extra thermal supervision.
* Only with TAU2
The installation can be done by yourself, we provide you with an instruction manual so you can follow the steps for an complete setup. If you dont want to install it yourself we can also provide the installation for you.