DRONExpert Netherlands is proudly presenting there lightweight FLIR Vue (Pro R) mount. This complete package weights 190 gram including all the parts (mount, transmitter, converters, cables, FLIR camera including storage module). Due the low payload, there is a minimal reduction in flight time.
Camera prices below…
The FLIR Vue (Pro R) mount is available for:
– DJI Phantom 3 (all versions)
– DJI Phantom 4 (all versions)
– DJI Inspire 1 (all versions)
– DJI Inspire 2
– DJI Matrice 100
– DJI Matrice 200/210
– DJI Matrice 600
– Yuneec Q500 (can be swapped with Yuneec RGB)
– Yuneec H520 (contact DRONExpert for more info)
LCD touch controller option:
The FLIR Vue mount can optionally be expanded with the ‘FLIR long range LCD touch control unit’. The FLIR long range LCD touch control unit normally cost 1695 Euro, however in combination with the VUE (Pro R) mount the FLIR long range LCD touch control unit has more then 50% discount and has an additional price of 800 euro (total price 1995 euro for complete package).
The FLIR long range LCD touch control unit gives the end user the possibility to (remotely) control: tilt, zoom, palettes, FLIR settings, start/stop recording, relatherm and set the threshold of the ‘Automatic Hotspot Detection’ (if camera is radiometric).
Specifications FLIR long range LCD touch control unit:
– Longe Range, more then 2km
– For all Flir camera with BlueTooth control (Vue Pro and Vue Pro R series)
– Receiver module with integrated GPS/MAVlink output (optional)
– Replacement for short range BT Flir UAS App
– Easy Quick-release on DJI remote
– Rechargeable integrated battery
– Gimbal control by programmable buttons
– USA 915,6MHZ / EU 869,5Mhz
With the setup you will have simultaneously daylight and thermal view. In most applications it is essential to have an combination with the daylight camera. The thermal is perfect for detection and the daylight camera is excellent for recognition.
With the radiometric camera combination (Vue Pro R) you are able to store video and radiometric images on an integrated microSD card. This way you can use FLIR TOOLS for afterwards analyzing and generate reports with use of the recorded radiometric images. Radiometric data is stored in Radiometric JPEGs with temperature data embedded in every pixels.
Automatic hotspot detection:
The ‘Automatic hotspot detection’ is an feature developed by DRONExpert Netherlands and only available on the 3in1 Radiometric thermal gimbal. When scanning the surface you will automatically be notified when an hotspot is detected. This is highlighted on the LCD screen with the measured temperature, but you also get an acoustic alarm on the FLIR touch controller (can be switched off). Threshold settings are fully adjustable with the LCD touch remote, which allows you to select the preferred temperature bandwidth, for example if you are searching for animals you can select different temperature bandwidth then when you are searching for bush fire.
This feature is only available in combination with the Vue Pro R and FLIR long range LCD touch control unit.
The installation can be done by yourself, we provide you with an instruction manual so you can follow the steps for an complete setup. If you dont want to install it yourself we can also provide the installation for you.
|FLIR long range LCD touch control unit (regular price €1695)||€ 800|
|Tripod with build in charging hub for LCD and controller||€ 369|
|FLIR camera for installation onto the VUE (Pro R) mount||Price|
|FLIR Vue 336||€ 1499|
|FLIR Vue Pro 336 (including storage)||€ 1999|
|FLIR Vue Pro R 336 (including storage and radiometric)||€ 2999|
|FLIR Vue 640||€ 2999|
|FLIR Vue Pro 640 (including storage)||€ 3499|
|FLIR Vue Pro R 640 (including storage and radiometric)||€ 4499|
If you for example choose the FLIR Vue (Pro R) mount including the FLIR Vue 336. Then the total combination cost are € 1195 (Vue (Pro R) mount) + € 1499 (FLIR Vue 336) = total price € 2694