Quality, light weight and full functionality

For the compact drones on the market

DRONExpert Nederland has developed the VUE PRO R mount for the compact drones in the market.
The VUE PRO R mount is not equipped with stabilization servos and is therefore considerably lighter than the 3in1 gimbal.

The keywords for this new VUE PRO R V2.0 mount are: light weight, quality, perfect price / quality ratio, without sacrificing functionality.

VUE PRO R mount

excl. camera en controller
1295
  • VUE PRO R mount
  • 7" thermal LCD receiver
  • Connection material
  • 5.8Ghz video transmitter/receiver
  • Carry case
  • DIY handleiding
  •  
  •  
  •  

VUE PRO R mount

no camera, including FLIR LCD remote
2095
  • VUE PRO R mount
  • 7" thermal LCD receiver
  • Connection material
  • 5.8Ghz video transmitter/receiver
  • Carry case
  • DIY handleiding
  • FLIR LCD touch control unit
  •  
  •  

VUE PRO R mount

with 336 camera and FLIR remote
5095
  • VUE PRO R mount
  • 7" thermal LCD receiver
  • Connection material
  • 5.8Ghz video transmitter/receiver
  • Carry case
  • DIY handleiding
  • FLIR LCD touch control unit
  • Auto Hotspot Detectie
  • FLIR VUE PRO R 336

VUE PRO R mount

with 640 camera and FLIR remote
6595
  • VUE PRO R mount
  • 7" thermal LCD receiver
  • Connection material
  • 5.8Ghz video transmitter/receiver
  • Carry case
  • DIY handleiding
  • FLIR LCD touch control unit
  • Auto Hotspot Detectie
  • FLIR VUE PRO R 640

Thermal control at your fingertips

LCD touch remote control

ptionally, the VUE PRO R mount can be equipped with the DRONExpert® LCD touch remote control unit. With this remote you can operate the FLIR VUE PRO R on a (long) distance.
Depending on the type of camera you can control the following functions remotely:

  • Color palettes
  • Digital zoom
  • Start stop recording (photos, video, burst and timelapse)
  • Conditions
  • Camera settings
  • Scenes
  • Presets
  • Tilt angle
  • Color settings
  • App mode
  • Automatic Hotspot Detection

This makes the DRONExpert® LCD touch control unit indispensable for professional applications.

GPS coordinates

Geotagging

Optionally, the thermal mount can be equipped with a geotagger. This ensures that the radio-metrically recorded thermal photos are provided with coordinates.

Simultaneously realtime daylight and thermal view

Double camera setup

The thermal drone set-up is equipped with dual cameras (RGB/thermal). This means that you have realtime daylight and thermal imaging at your disposal simultaneously. The thermal image is very suitable for detection and the RGB image is perfect for recognition.

Adjustable frequency / Band / Power

For worldwide use


In order to be able to use the mount worldwide, it is equipped with an adjustable video transmitter. This way you can adjust the following settings yourself:

  • Frequency
  • Band
  • Power output 25/200 of 600mw (the stronger the power output, the further the video signal)
3-adjustable-freq
4 Automatic Hotspot

Perceive faster with

DRONExpert Automatic hotspot detection

Indispensable in many applications: the DRONExpert Automatic Hotspot Detection.

When the contrast of the temperatures is close to each other, then quickly detecting an object with thermal image is very difficult (see photo on the left), with the DRONExpert Automatic Hotspot Detection you will immediately receive a message in your display when a hotspot is detected by your thermal camera, this is possible by measuring based on the temperature value in the pixel. The threshold value of this function is adjustable as desired, so that almost any desired object can be detected.

This functionality is indispensable for Search and Rescue, but can also be used when searching for wildlife, birds and eggs or for industrial inspections and solar panel checks.

Creating reports, post-processing and calibrated temperature measurement

Raw data capture

If you combine the VUE PRO R mount with a radiometric camera (VUE PRO R or TAU2 R), radiometric photographs can be taken which enable you to make temperature analyses and generate reports with FLIR tools.

The Tripod holder

The optional tripod provides optimal comfort during your flights. The thermal LCD and DJI remote can be installed onto the tripod and can be charged through an integrated battery holder (drone battery)

No additional batteries required

Battery supply

For optimum performance, the power cable is installed inside the drone, which leads to the mount receiving its power through the drone battery. This way weight is being saved optimally and a maximum flight time is achieved.

The thermal package can be supplied completely ready to fly, but can also be used for installation of your own drone and/or camera. It is advisable to have DRONExpert Netherlands carry out the installation of the power supply cable if you opt for an "DIY installation package".

However, if you wish to perform the installation yourself, we can optionally provide the thermal mount with its own battery so that installation can easily be realized (the weight of the mount will be somewhat higher).

Compatibility drones and cameras

Developed for several drones

The VUE PRO R mount is compatible with multiple types of drones. For example, the VUE PRO R mount can be used for the following drone models (and more):

  • DJI Phantom 3
  • DJI Phantom 4 series
  • DJI Inspire 1 series
  • DJI Inspire 2 series
  • DJI Matrice series
  • Yuneec series
vueProR-product-frontView

Developed for several cameras

The VUE PRO R mount is available with the following cameras (or available for your own installation if you already have a thermal camera):

  • Vue
  • Vue Pro
  • Vue Pro R
  • Tau2
  • Tau2 R

Datasheet/specifications TAU2 pdf

Datasheet/specifications VUE PRO R pdf


Contact me