Solidity and Stability
Thermal Gimbal 3
The new upgraded TG3 thermal gimbal is for the professional user. This stabilized thermal gimbal is one of the most advanced thermal systems available at the moment.
GPS coordinates
Geotagging
Simultaneously realtime daylight and thermal view
Double camera setup
The thermal drone setup is equipped with dual cameras (RGB/thermal). This means that you have daylight and thermal imaging at your disposal simultaneously.
The thermal image is very suitable for detection and the RGB image is perfect for recognition.
Adjustable frequency / Band / Power
For worldwide use
- Frequency
- Band
- Power output 25/200 of 600mw (the stronger the power output, the further the video signal)
No additional batteries required
Battery supply integrated
For optimum performance, the power cable is installed inside the drone, which leads to the mount receiving its power through the drone battery. This way weight is being saved optimally and a maximum flight time is achieved.
The thermal package can be supplied completely ready to fly, but can also be used for installation of your own drone and/or camera. It is advisable to have DRONExpert Netherlands carry out the installation of the power supply cable if you opt for an "DIY installation package".
However, if you wish to perform the installation yourself, we can optionally provide the thermal mount with its own battery so that installation can easily be realized (the weight of the mount will be somewhat higher).
Creating reports, post-processing and calibrated temperature measurement
Radiometric recordings
Perceive faster with
DRONExpert Automatic hotspot detection
Indispensable in many applications: the DRONExpert Automatic Hotspot Detection.
When the contrast of the temperatures is close to each other, then quickly detecting an object with thermal image is very difficult (see photo on the left), with the DRONExpert Automatic Hotspot Detection you will immediately receive a message in your display when a hotspot is detected by your thermal camera, this is possible by measuring based on the temperature value in the pixel. The threshold value of this function is adjustable as desired, so that almost any desired object can be detected.
This functionality is indispensable for Search and Rescue, but can also be used when searching for wildlife, birds and eggs or for industrial inspections and solar panel checks.
Realtime GPS hotspot information
GPS Automatic Hotspot Detection
This function is identical to the regular "Automatic Hotspot Detection", but the "GPS Automatic Hotspot Detection" also displays the real-time GPS coordinates of the measured hotspot.
For example with "Search and Rescue" you can have real-time GPS coordinates of the person.
Thermal control at your fingertips
LCD FLIR touch remote control
The thermal gimbal is equipped with an LCD touch remote control, with which you can fully control the thermal FLIR camera remotely.
This LCD touch remote control unit is indispensable for professional applications. Some examples of what you can operate remotely with the LCD touch control unit are:
- Color palettes
- Digital zoom
- Start stop recording (photos, video, burst and timelapse)
- Conditions
- Camera settings
- Scenes
- Presets
- Tilt angle
- Color settings
- App mode
-
Automatic Hotspot Detection*
Switch between drones
Quick release system
If you do not need the thermal gimbal, you can easily dismantle the system using the quick release slide system.
If you also have another drone with the quick release slide mount, you can easily switch the thermal gimbal between these drones.
For situations were you are unable to fly
Drone / Handheld / Photopole
In reality situations may occur in which a drone is not possible for a thermal scan.
For example, "no-fly zones" or internal inspection. For this type of situation you can transfer the TG3 thermal gimbal to a Photopole or a Handheld.
The TG3 can therefore be used on a drone, photopole and handheld.
Compatibility drones and cameras
Made for various UAVs and cameras
De TG3 thermische gimbal is toepasbaar op verschillende merken en modellen drones. Voor de volgende drones kunnen we de 3in1 thermische gimbal leveren:
- DJI Inspire 1 series
- DJI Inspire 2 series
- DJI Matrice 100 series
- DJI Matrice 200 series
- DJI Matrice 210 (RTK) series
- DJI M300
- DJI Matrice 600 series
- DJI Wind series
The thermal gimbal is compatible with the following cameras:
- Vue
- Vue Pro
- Vue Pro R
- Tau2
- Tau2 R
The Tripod holder
The optional tripod provides optimal comfort during your flights. The thermal LCD and DJI remote can be installed onto the tripod and can be charged through an integrated battery holder (drone battery)
