DRONExpert Vue Pro (R) mount
Section: Modify your own Phantom 4
Have you bought the DRONExpert mount as 'Do it Yourself' installation for your own Phantom 4? Then the following 3 steps are required to make your Phantom 4 compatible.
The first step is tapping screw thread. This is for the screws of the sleeve (on this sleeve the DRONExpert mount can be slide on and off).
The 2nd step is to open the grey gimbal shell. This step is needed for the installation of the power cable (power supply DRONExpert Mount):
The 3th step is to solder the power cable. After this installation the shell can be closed again: PDF
(Heeft u bovenstaande 3 stappen voltooid, dan is uw Phantom 4 klaar voor gebruik en kan de DRONExpert mount hierop bevestigd worden. Let er tevens op dat u de downward sensoren geactiveerd in de DJI Go 4 app. In de ‘diverse’ handleiding sectie kunt u vinden hoe u dit kunt doen)
Section: Installation on DJI Inspire 1 series
Do you wish to install the 3in1 thermal gimbal onto your own Inspire 1, then you would need to install the power cable first:
Installation gimbal onto the Inspire 1. Old version, new version will be updated soon:
Section: Mounting and connecting the Vue Pro (R) mount
Mounting and connecting the Vue Pro (R) mount:
Warning: After installing the 'sleeve' it is essential to deactivate the downward sensors in the DJI Go 4 App. In the section 'Various' you can find the instructions how to do this.
Section: DRONExpert capacitive LCD touch control
If you experience problems with the DRONExpert capacitive LCD touch controller than you can reset it: PDF
Section: Various
Uitleg van de thermische handheld PDF
Deactivate downward sensors: PDF
This is essential and strongly recommend for the following series:
- Mavic 1 series
- Phantom 3 en 4 series
- Inspire 1 en 2 series
An overview for the correct placement of the antennas: PDF
Installation 10m carbon fibre photo pole
Installation for the optional thermal handheld:
Installation optional custom tripod with build in battery holder:
Version 2020:
Version <2019:
Original manual thermal screen (Blackpearl Flysight): PDF
Manual DJI GS PRO - Groundstation for making flight plans / waypoints: PDF
Installation thermal LCD holder on DJI controller (Phantom 3 + 4, Inspire 1 + 2 and Matrice 100):
DJI UAV manuals and support: URL
Download here FLIR Tools software for post processing, analysing and creating reports.
Note: This software is only compatible with radiometric model cameras (Vue Pro R and TAU2R)
Download here de FLIR Studio software om de thermische fotos te analyseren en te bewerken.
Note: This software is only compatible with radiometric model cameras (Vue Pro R and TAU2R)
FLIR Tools user guide: PDF
FLIR Vue Pro R datasheet: PDF
FLIR Vue Pro R user guide: PDF
Interface Requirements Specification for FLIR TIFF File Format: PDF
FLIR Vue PRO R – Radiometry Tech Note: PDF
FLIR Vue PRO – Technical Drawing: PDF
Can I help you?
Need assistance? We gladly help.
E-mail: support@dronexpert.nl
WhatsApp: +31630303404
